“Transformers” in the world of transparent materials: How PVC, EVA, and TPU are reshaping modern life？

In the arena of transparent material science, three polymer materials, PVC, EVA, and TPU are having the legends of modern industry with their unique properties. They seem ordinary, but they "write" a wide range of applications for the various bags in our daily necessities.

PVC (polyvinyl chloride): a counterattack of civilian materials

50. Keywords: Cheaper, Cheap, high-transparency, and environmental protection.
50. Specification: Density 1.15–1.35 g/cm³, hardness ShA 40–90, 0.3/0.5 mm film is the regular thickness we used in our daily bags; Plasticizer must be added into soften, and the mainstream DOP has been included in the restriction list by European REACH.
50. Application: Cosmetic bag, Toiletry bag, Floor mats, Promotional transparent bags for super markets.
50. Advantage: high transparency, water resistance, and easy printing; The lowest cost, easy to obtain raw materials, rich color, acid and alkali resistance, water resistance, can be flame retardant. It can be compounded with other materials to increase waterproof, easy to scrub and other functions to improve its advantages.
50. Disadvantage: low temperature hardening, easy yellowing, and recovery rate of < 10% The lowest cost, easy to obtain raw materials, high transparency, rich color, acid and alkali resistance, water resistance, flame retardant.

EVA (ethyl vinyl acetate): The explorer of flexibility

50. Key words: light, foamable, milky white hazy .
50. Specification: density 0.91–0.93 g/cm³, the higher the VA content, the softer it is; The density can be pressed to 0.18 g/cm³ after closed-cell foaming, which is environmentally friendly. 
50. Applications:

1. "Cosmetic bag, washing three-dimensional bag" - hot-pressed integrated moldings;
2. "Camera bag" - Can be used for lining with drop-resistant;
3. "Mommy storage bag" - washable, phthalate-free.

50. Advantages: good elasticity, good cushioning, still flexible below 0 °C, no plasticizer, non-toxic and odorless, it also can be compounded with other materials to increase waterproof, easy to scrub and other functions to improve its advantages. 
50. Disadvantages: cannot be made of high permeability, the surface is easy to stain with dust, high temperature resistance is poor, about 80 °C softens and deforms, the surface is slippery, the wear resistance is average, the surface is slippery, the wear resistance is average.

TPU (thermoplastic polyurethane): the innovator of engineering plastics

50. Keywords: high elasticity, scratch resistance, environmental protection ace. 
50. Specifications: density 1.10–1.20 g/cm³, tensile strength ≥ 30 MPa, no plasticizers, mechanically recyclable, incineration halogen-free.
50. Applications:

(1) 0.3 mm matte "airplane box" – Dior Pre-Spring 2025;

(2) 0.5 mm transparent "box bag" Jacquemus;

(3) TPU composite nylon Longchamp "Green Line" series, the carbon footprint is 38% lower than PVC.

50. Advantages: high elasticity + high wear resistance, oil resistance, solvent resistance, hydrolysis resistance, hot melt welding, seamless waterproofing, REACH, RoHS compliant, 100% mechanical recyclable, good environmental protection image. High transparency (90%) allows it to be made into a "glassy" handbag or a matte high-quality texture.Same as PVC and EVA, it can be compounded with other materials to increase waterproof, easy to scrub and other functions to improve its advantages as well.
50. Disadvantages: Expensive, density 1.1–1.2, twice as heavy as EVA, to make an "ultra-light" midsole, need to foam TPU granules, and the cost is doubled. Some polyester TPUs will be hydrolyzed after long-term soaking in water, and the polyether type formula needs to be changed.

Here is the comparison chart for PVC, EVA, TPU for some performance index:

How to tell the difference for PVC, EVA and TPU?

50. From the smell: Noticeably pungent sour or "plastic" smell, especially when the sealed bag is first opened for PVC. Not any smell for EVA and TPU.
50. From the burn: Normally PVC is yellow up and green down with exhaling white smoke; EVA is blue flame; TPU is yellow flame.
50. From bending rebound: TPU rebound is fast and silent; PVC rebounds slowly and is accompanied by a "click" sound; EVA turns white after folding, but basically does not rebound.

PVC allows you to "spend a little money to do big things", EVA gives you "light clouds", and TPU writes "environmental protection + luxury" into the brand's DNA - handbags are no longer just about packing things, they are voting for consumers and choosing the future of the earth.

If were to summarize it with a short poem, it would be:

PVC: cheap, transparent and not cold-resistant;

EVA: light, soft, environmentally friendly, and non-wear-resistant;

TPU: wear-resistant and high elasticity has the highest price.